what paint to use on greenleaf dollhouse village

I made all of these dollhouses using the buildings establish in Greenleaf Dollhouses series of miniature buildings. All of these buildings are in quarter calibration and tin can be used for miniature railroads, Christmas village scenes and other miniature displays.

The Quarter Scale Arthur Dollhouse

I blogged my first assembly of this dollhouse here. This is my 2d assembly and I decided to make a few changes.

This dollhouse comes in The Miniature Greenleaf Village kit. It is assembled the same way equally a ane inch calibration, tab and slot dollhouse. These buildings are originally made to be closed in the dorsum, and then they can be used as gift boxes, but I modified them to take open up backs like dollhouses.

The dollhouse is displayed on a black, foam cadre base, which I landscaped. The landscaping was done using diorama copse and grass paper. I also scattered loose green moss and silk flower berries, around the chiliad, for added detail. The flamingos are fairy garden miniatures that happen to exist the right scale for this dollhouse.

The floors and room dividers had to be made from balsa wood slabs. The doorway that goes from the bedroom to the bathroom was likewise custom made. I created a staircase for the dollhouse equally well. This interior modification requires a lot of stip wood.

I hinged the forepart door using a masking tape strip, since chamois at this scale, is much likewise thick. With the door slightly open, a view of the staircase is simply barely visible.

This dollhouse kit does non come up with interior moldings, and then they all had to exist custom fabricated using sparse cardstock newspaper. All of the wallpaper was calculator printed and the flooring is forest printed scrapbook paper. The gingham tabular array display was not made by me. Information technology was a gift from a fellow miniaturist. The details are very hard to see because of how pocket-size this display is simply information technology is consummate with tiny burgers on plates, napkins, ketchup and mustard bottles.

All of the furniture is plastic. I made all of the accessories from strip wood, air drying clay and foursquare and circular dowels.

I dressed the bed and painted many of the accessories with flowers for added detail. All of the doorknobs are made of jewelry beads.

This is the tiny bathroom. Considering the rooms are so tiny, at this scale, I used a mucilage stick to apply all of the wallpaper and floor. Tacky or white glue would exist as well thick to use.

This is a view of the staircase from the acme.

The Quarter Scale Sugarplum Cottage Dollhouse

This dollhouse comes in The Miniature Greenleaf Hamlet Kit, but it has to be modified in order for it to have an open back for finishing and decorating.

The tiny gnome in the front chiliad is a fairy garden item. The debate is also an particular that is used for fairy gardens but it is the correct scale for this dollhouse. It is made from thin tin which can exist easily cutting with scissors and painted to match any decor.

Considering I wanted this dollhouse to be as like to its one inch calibration version equally possible, I had to modify it significantly with custom made pieces. The settles in the front porch are an instance of this. Both settles had to exist custom fabricated from balsa wood slabs. I also had to create the side chimney and the front window flower box.

I thatched the roof using faux fur. The wishing well is entirely handmade using air drying dirt, varying sizes of strip wood, dowels and balsa wood slabs.

I had to modify the back roof in order to view the second floor. The flooring itself is created from a balsa wood slab. I covered it with forest printed scrapbook newspaper.

All of the interior trim is custom made from thin cardstock newspaper. The chimney flues are made from square dowels. I had to create the indoor fireplaces with brick printed paper. It is the aforementioned paper I used to cover the chimney on its exterior.

I used spackling chemical compound to stucco the dollhouse both on the outside and interior. Because this calibration is so pocket-sized, spackling compound is the easiest fabric to apply for stucco.

I fabricated the ceiling beams from wooden dowels.

I fabricated all of the nutrient items from air drying clay. The other accessories are fabricated from varying sizes of strip forest and wooden dowels. The article of furniture is plastic.

The perfume bottles are fabricated from jewelry beads. I used a computer printed quilt to clothes the bed with. The tiny dog was not made past me. It was a gift from a swain miniaturist.

The Quarter Scale Buttercup Cottage Dollhouse

This is a completely custom dollhouse equally this dollhouse is not included in whatever of the Greenleaf Dollhouses quarter calibration village kits.

I fabricated this dollhouse from dissimilar left over building parts in The Miniature Greenleaf Village kit.

I used soft balsa wood to cutting out arched windows and architectural details for this dollhouse. This soft woods tin can be hands cut with a craft pocketknife and sanding can help accomplish fine details.

The flooring and wallpaper were printed from the computer.

All of the interior accessories have to be mitt made considering they are very hard to find at this calibration. This quarter scale plastic piece of furniture is easily painted to reach a variety of unlike looks.

The chimney is made of balsa wood and covered in brick printed paper.

I used the dissimilar bushes and basis encompass found in the diorama section of the craft shop to create the landscaping.

The Quarter Scale Brimbles Mercantile Dollhouse

This tiny dollhouse is part of The Miniature Greenleaf Town kit. Like I did with the other quarter scale dollhouses, I modified information technology to have an open up dorsum and two floors.

The tiny car was a rare discover on eBay.

I hinged the doors using a masking tape strip, hidden with door trim.

I was able to notice trees on sale at my local craft store. You can find all of the mural textile for these dollhouses in the diorama section of your local craft store.

Considering the dollhouse is so minor, almost all of the accessories in the interior had to be handmade.

The cans on the wall shelves were made from wooden dowels. I printed the labels from the computer.

The apples and potatoes are handmade from clay.

I used scrapbook newspaper for the wallpaper and flooring. Y'all can also utilise computer printed papers for dollhouses this small.

All of the interior and exterior trim is custom made from strip woods.

The Quarter Calibration Orchid Dollhouse

This dollhouse is part of the Corona Concepts Miniature Pine Mount Village Kit. I decided to practise mine all white in honor of Greenleaf Dollhouses "White Orchid Dollhouse". The "White Orchid Dollhouse" is no longer in production. Information technology was a express edition dollhouse which was released to exam a new composite textile that Greenleaf Dollhouses was considering for employ on its dollhouse models. The fabric was all white and when people assembled their dollhouse, they realized information technology looked beautiful and unique unfinished, creating an all white dollhouse. Information technology became known as "The White Orchid". Dollhouse enthusiasts from all over began taking photos of their "White Orchids". Though Greenleaf Dollhouses decided to non utilize the blended cloth again, "The White Orchid" kit has become legend and continues to be a much sought later on, very rare kit.

This kit does not come with shingles, but I had left over quarter scale shingles from previous projects. The cameo is a button that I painted all white to match the dollhouse.

I kept the landscaping as white as possible with a few splashes of green sprigs and pink on the flowering trees and bushes.

I customized several features of this dollhouse, in order to brand information technology every bit close to the ane inch scale version as possible. I added window sills, a bay window and flower boxes.

The frosted windows came with the kit but I decorated them with fingernail fine art for a unique blueprint.

I painted the furniture argent and added crystal beads and fingernail art for particular. The best way to achieve a very shiny silver terminate is to employ permanent argent markers to paint the piece of furniture.

The accessories are silverish beads in different shapes and sizes.

I used scrapbook newspaper in low-cal grays for the walls and white felt for the flooring.

I program on adding more decorative pieces to this dollhouse as I find unique items in the correct calibration.

The Quarter Scale Adobe Dollhouse

This dollhouse was fabricated from parts of the left over buildings in The Miniature Greenleaf Town.

I used spackle mixed with acrylic paint to create the exterior stucco.

The argue is completely custom made from balsa wood. I used wooden dowels for the roof pegs and custom painted the exterior furniture for a southwest wait. The desert landscaping can exist found in the diorama section of your local arts and crafts store. The carpet on the fence is a computer paper impress out.

I used strip wood to make custom beams on the interior. The flooring was made from computer printed paper. I used gloss acrylic to give the tile paper a shiny look.

I paw painted all of the piece of furniture to requite information technology a southwest await.

The chimney is a ringlet of cardstock covered in spackle to create the await of stucco. The tiny cactus planters hanging from it are handmade from woods strips and dowels.

The little hat was a rare observe. All of the wall art was printed from my computer.

All of the interior rugs were printed from my computer. I used scissors to snip the edges for a frayed look.

The Quarter Calibration Storybook Cottage Dollhouse

This is not technically the Storybook Cottage Dollhouse, but information technology sure looks similar it. It'southward 1 of the buildings in The Miniature Greenleaf Boondocks Kit. The gazebo is likewise role of the same kit.

You lot can find all of the exterior landscaping and accessories for a tiny Christmas business firm during the Christmas flavor at your local craft store. All of these items are from Christmas villages, which are a like scale to this dollhouse.

I made the snowman myself from cotton fiber balls and jewelry findings.

The Christmas tree inside of the gazebo was handmade using tiny paper print outs and jewelry findings for ornaments. The snowfall on the roof is baby powder.

I used scrapbook papers for the flooring and walls of this dollhouse. All of the interior and exterior trim is custom made from strip wood.

All of the accessories and pastries in the brandish case are handmade from air drying clay.

All of the toys are made from air drying clay and the cash annals is made from balsa woods.

The Quarter Scale Custom Cottage Dollhouse

This dollhouse comes in the Corona Concepts Dollhouses Miniature Pine Mount Hamlet Kit. Like all of the other buildings, in these kits, I modified it to have an open back.

I used diorama landscaping materials to create the exterior scenery. These little trees where on clearance for $i. I similar the niggling fruits on them, they await like processed. Perfect for a candy shop.

I used the same color scheme as The Storybook Cottage Dollhouse I assembled and finished years ago. The bubble glue machine exterior is a jewelry charm.

This dollhouse has very express interior space, so I fabricated it only ane floor. All of the display cases and furniture on the interior are custom made from balsa wood.

The candy containers are articulate plastic tubing filled with different colour beads, clay slices and colorful confetti.

I used candy printed record for a border on the wallpaper. All of the flooring and wallpaper are scrapbook paper. The ceiling lamp is made from colorful tape and beads.

The Quarter Scale Washington 2.0 Dollhouse

I miss my hand stenciled Washington 2.0 Dollhouse. Simply, I do not take any more infinite in my abode for a full sized dollhouse, and so what to do? Create your own tiny version.

This Washington 2.0 replica, in quarter scale, was made using the leftover parts from buildings in the Corona Concepts Miniature Pine Mount Village Kit, but I have to admit, the pickings were slim and the unabridged dollhouse had to be mostly made from scratch.

I stained the dollhouse and stenciled information technology, simply like I did its full size sister.

I tried to recreate all of the details of the full size version, including the chimney, window boxes, wrap around porch, shutters, window mullions and even the "lock associates" exposed on the roof.

I created the same number of floors and rooms every bit the full size version. I wanted this to exist a state house so I used landscaping that matched that theme.